proGPS 1101

proGPS 1101

£1.00 Ex VAT

£1.20 Inc. VAT

Completely galvanically isolated active 4-way GPS signal splitter that can be used with both active and passive antennas.

  • It is designed for GPS/GALILEO L1 and GALILEO E1 and E2 bands – basic free civilian frequencies.
Availability: Available on back-order SKU: proGPS-1101

proGPS™ series of 4-way GPS/GNSS Signal Splitters is a professional high-quality satellite positioning

system signal splitter. It is designed especially for demanding marine and military environments.

proGPS™ series of GNSS (Global Navigation Satellite System) Signal Splitters includes both active and passive, galvanically isolated and non-isolated versions of signal splitters. The proGPS™ series covers all navigation satellite systems including GPS, Glonass, Compass and Galileo and both their public and private frequencies.

The operation is simple and reliable. proGPS™ splitters distribute GPS/GNSS antenna signal from one ideally located GPS/GNSS antenna to up to four independent navigation receivers maintaining complete galvanical and radio frequency isolation between receivers preventing one faulty receiver to interfere with others. Thus proGPS™ improves performance of a single GPS/GNSS receiver and minimizes the occupied space on the ship’s topside.

proGPS™ technology protects the GPS/GNSS signal from jamming and minimizes interference. Thus it provides an outstanding signal quality and navigation solution for GPS receivers. Not only does it isolate the GPS/GNSS receivers from each other, but also from the antenna and the external power supply.

Advanced features create advantage

  • supports all satellite navigation systems
  • instant installation to retrofits
  • no ground leaks from GPS/GNSS system
  • optimum location for GPS/GNSS antenna
  • only “one” position for the GPS/GNSS receivers
  • reduced cabling
  • less space occupied at ship’s topside
  • galvanically isolated antenna from receivers
  • galvanically isolated from ship’s mains power
  • galvanically isolated from the ground
  • signal protection with high interference rejection

Table 1 Electrical Specifications (TA=25°C)

  • Antenna Port (grounded): 1575.42MHz (pass band 1550-1590MHz) / RL: >5dB (avg.) / Coax Shield connected to case body
  • Receiver Ports:
    • OUT1: gain: 1dB – 3dB (L1) / -2dB – 1dB (E1/E2) / (+/- 0,5dB)
    • OUT2: gain: 1dB – 3dB (L1) / -2dB – 1dB (E1/E2) / (+/- 0,5dB)
    • OUT3: gain: 1dB – 3dB (L1) / -2dB – 1dB (E1/E2) / (+/- 0,5dB)
    • OUT4: gain: 1dB – 3dB (L1) / -2dB – 1dB (E1/E2) / (+/- 0,5dB)
  • Galvanical isolation: Receiver ports: DC floating / Antenna: DC grounded / Power supply: DC floating
  • Power Supply isolation voltage: 9-36 VDC, 0.2A (max) / 500V
  • Reverse polarity protection: Yes
  • Port Isolation (between outputs): > 30dB (avg.)
  • Port impedance: 50ohm
  • Connectors: N – female
  • Resistance to ground: Body grounded with coax shields, antenna port shield and radio port shields in common potential

Table 2 Mechanical and Environmental properties (TA=25°C)

  • Dimensions: height: 34mm / width: 150mm / length: 67mm
  • Weight: about 350g
  • Material: aluminum body
  • Mounting: lid with M5 holes (4x)
  • Ingress protection: none
  • Operational environment: -20° – +60° C
  • Standards: All proGPS™ products are designed to the standard of IEC60945 to insure safe operation in the environment on relevant parts. Some of the criteria are operating temperature, storage temperature, humidity, vibration, electromagnetical compatibility. proGPS 1101 is designed to meet the IMO resolution MSC.112(73)

    chapter 4. Protection standards to GPS receivers and it is designed not to degrade performance as stated in

    chapter 3.


Country of Manufacture: ?